*Heating materials: High quality PET nanometer heating films
*Outer layer materials: Velvet+EVA environmental protection layer+Cotton+Non-woven nylon composite
*Battery Voltage: 3.7V Li-ion Battery
*Battery Capacity: 2*3600mAh
*Charging time: 4 hours for 1 battery.
*Warm Time: 6 hours (depending on the outside environment)
*Heating Temperature: 55 Celsius Degree (depending on the outside environment)
Warming Area: Middle and front of the insoles
*Certifications: CE & RoHs
*1 x Electric Heating Insoles (1 Pair)
*2 x 3600MAh Li-ion Battery
*2 x Battery Bag
*1 x Charger(US Plug or EU plug)
Put the insoles in to shoes, and take the cables out from shoes. then put the batteries in to leg wraps bag and insert the cable to the battery.the insoles start to work. About 5 minute you can feel 10°C higher than before. if you don't want to heat,please unplug the battery. if batteries run out till the light turn off, please charge the batteries.
How to charge battery:
1.Take the charger out and connect to 2 in 1 cable, Charge to power,the light on charger is green, then connect battery to 2 in 1 cable tightly. the Charger light will be Red and it's normal charging status.
2.If the light still green,please check if the batteries had been plugged tightly or Batteries are full.
3.When fully charged, the charger light will be green again.
1.Please confirm the insoles function are good then cut to fit. DO NOT cut minimum size line.
2.Disassemble the gloves and batteries are not permitted.
3.Gloves can be gently wiped by wet cloth or washed by hands.DO NOT wash battery.
4.Please don't wear the insoles to do strenuous exercise.
5.Please don't use in places temperature higher than 30°C in case of hurting yourself or cause fire disaster.
6.If you don't use it please charge the batteris and put in dry places.
7.To maintain the batteries' best function, please charge it every 3 months.
8.When connect or unplug the DC port, please be gently not to ruin the inner cables in the insoles.