FF918-CWLS PRODUCT SPECIFICATION:
1) Display: 3.5inch MVA-TFT-LCD
2) Back lighting: On/off White LED
3) Depth Capability: 328feet(100m)
4) Sonar Coverage:45degrees beam angle in 200Khz
5) Wireless operational Range: 980feet(300m)
6) Power Requirement: 11 to 13V DC
7) Water depth,water temperature, fish location, bottom contour can be constantly obtained from the water
8) User selectable sensitivity,zoom,units,depth range,shallow alarm,fish icon,fish alarm,and chart speed setting
9) Built in memory stores sonar setting when the fish finder is turned off
10) Operational Temperature: 14°F to 122°F(-10°C
1. Install the transducer to bait boat . and put it to water
FF918-CWLS sonar coverage is 45 degree beam angle in 200Khz.
This model can constainly obtain water and fish information.
Monitor main key:
1. Up arrow key
2. Mode key
3. Power/Menu key
4. Sensitivity key
5. Down arrow key
6.. Light key
1. 11V to 13.5V DC battery(not included)
4. Signal tower
5. Extension of antenna
1. Battery capacity 7. Lower zoom range
2. Upper Zoom Range 8. sensitivity
3. Water sufurce line 9. Water depth
4. Small fish icon 10.Water temperature
5. Depth ruler 11.Medium fish icon
6.Large fish Icon 12.Bottom contour
This item wirelss Operating range is 300M
This item detecting water depth is 100M
Bait boat information
FF918-CWLS is suitbale for some general bait boat :Carplounge/Waverunner/Vegaboat/ Carp/Anaconda/ Anatec catamaran ,etc .
Lucky fish finder is not include the bait boat antenna.
1.Please use 10V to 12.5V DC battery to power the signal tower.
2.Extension to antenna cannot be used as antenna.
3.Please install the antenna before connecting the power.
4.Antenna only enhances the ability to receive signals!
5.Please don’t test the fish finder in the air，which should it test in the outside water area.!!!
6. The power adapter is EUROPEAN, if English or Ameriacan power adpater is needed, please leave a message ,thanks.
7. New and old probes are shipped randomly