Product:
Protocol Standard: IEEE802.3 10BASE-T ETHERNET standard, IEEE802.3U 100BASE-TX ETHERNET standard
Ports: Two 10M / 100M uplink ports and six 10M / 100M downlink ports
Power: DV15V 6A
SPOE power supply: 6 downstream ports support SPOE power supply, can connect 6 DC12V network cameras or AP
LED Indicators: 9 indicators, 8 port status indicators, a power indicator
Internet function:
1. Support loop monitoring
2.6 downlink port isolation
3. Support full duplex / half-duplex mode of operation
Automatic MDI / MDI-X line order crossover
5. Store and forward and frame filtering
6. Automatic address learning and aging
7. Broadcast storm suppression
Dimensions: 130MM * 70MM * 26MM
Operating temperature 0 ℃ to 50 ℃
Storage temperature -20 ℃ to 70 ℃
Working humidity 5% to 90%
Storage humidity 5% to 90%
This is an unsolicited Power Over Ethernet switch to 8 ports with10 / 100Mbps , including 6 unsolicited PoE Ethernet ports and 2 Uplink ports. With an external 110V-240VAC to15VDC power supply adapter, any one of the 6 port can provide output power, Each ethernet port can provide network transmission speeds of up to 10 / 100Mbps,If you want to access Ethernet and uplink devices, use the POE splitter to connect the splitter's crystal head to the upstream port and the DC port to the device.
It is suitable for POE splitters and all devices with DC12-15V voltage.
Poe switch + POE splitter for use with all IP camera and wireless AP。
1. The function of current protection (It will automatically break off When the input current is high )
2. SPOE Power Supply, Power consumption of the machine is 90W
3. Follow the Fast Ethernet protocol of IEEE802.3/ IEEE802.3u
4. All ports support Full-duplex mode/Half-duplex mode
5. Automatic MDI/MDI-X wire sequence crossing
6. Store, forward and filtering by Automatic mode
7. Flow control of Full-duplex mode IEEE802.3、Half-duplex back pressure operation
8. Supports data frame transmission with a frame length of 1522 Byte
9. Easy to operatiooperation